Charting Transport

Trends in journey to work mode shares in Australian cities to 2016 (second edition)

Tue 24 October, 2017

[Updated 1 December 2017 with reissued Place of Work data]

The ABS has now released all census data for the 2016 journey to work. This post takes a city-level view of mode share trends. It has been expanded and updated from a first edition that only looked at place of work data.

My preferred measure of mode share is by place of enumeration – ie how did you travel to work based on where you were on census night (see appendix for discussion on other measures).

I’m using Greater Capital City Statistical Areas (GCCSA) geography for 2011 and 2016 and Statistical Divisions for earlier years. For Perth, Melbourne, Adelaide, Brisbane and Hobart the GCCSAs are larger than the Statistical Divisions used for earlier years, but then those cities have also grown over time. See appendix 1 for more discussion.

Some of my data goes back to 1976 – I’ll show as much history as I have for each mode/modal combination.

Public transport mode share

Sydney continues to have the largest public transport mode share, and the largest shift of the big cities. Melbourne also saw significant positive mode shift, but Perth and particularly Brisbane had mode shift away from public transport.

There’s so much to unpack behind these trends, particularly around the changing distribution of jobs in cities that I’m going to save that lengthy discussion for another blog post.

But what about the…

Massive mode shift to “public transport” in Darwin?!?

[this section updated 26 Oct 2017]

Yes, I have triple-checked I downloaded the right data. “Public transport” mode share increased from 4.3% to 10.9%. The number of people reporting bus-only journeys went from 1648 in 2011 to 5661 in 2016, which is growth of 244%. There has also been a spike in the total number of journeys to work in 2011, 30% higher than in 2011, while population growth was 13%.

Initially I thought this might have been a data error, but I’ve since learnt that there is a large LNG gas project just outside Darwin, and up to 180 privately operated buses are being used to transport up to 4700 workers to the site. This massive commuter task is swamping the usage of public buses.

Here’s the percentage growth in selected journey types between 2011 and 2016:

Bus + car as driver grew from 74 to 866 journeys, which reflects the establishment of park and ride sites around Darwin for the special commuter buses. Bus only journeys increased from 1953 to 5744. So it looks like most workers are getting the bus from home and/or forgot to mention the car part of their journey (in previous censuses I’ve seen many people living kilometres from a train station saying they got to work by train and walking only).

So this new project has swamped organic trends, although it is quite plausible that some people have shifted from cycling/walking to local jobs to using buses to commute to the LNG project (which is outside urban Darwin). When I look at workplaces within the Darwin Significant Urban Area (2011 boundary), public transport mode share is 6.0%, in 2016, still an increase from 4.4% in 2011. More on that in a future post.

Train

Sydney saw the fastest train mode share growth, followed by Melbourne, while Brisbane and Perth went backwards.

Bus

Darwin just overtook Sydney for top spot thanks to the LNG project. Otherwise only Sydney, Canberra and Melbourne saw growth in bus mode share. Melbourne’s figure remains very low, however it is important to keep in mind that trams provide most of the on-street inner suburban radial public transport function in Melbourne.

Train and bus

Sydney comes out on top, with a large increase in 2016 (although much of this is still concentrated around Bondi where there are high bus frequencies and no fare penalties for transfers – more on that in an upcoming post). Melbourne is seeing substantial growth (perhaps due to improvements in modal coordination), while Perth, Adelaide and Brisbane had declines in terms of mode share (Brisbane and Adelaide were also declines on raw counts, not just mode share). I’m sure some people will want to comment about degrees of modal integration in different cities.

Train and bicycle

Some cities are also trying to promote the bicycle and train combination as an efficient way to get around (they are the fastest motorised and (mostly)non-motorised surface modes because they can generally sail past congested traffic). The mode shares are still tiny however:

Sydney and Melbourne are growing but the other cities are in decline in terms of mode share.

As this modal combination is coming off an almost zero base, it’s also probably worth looking at the raw counts:

The downturns in Brisbane and Perth are not huge in raw numbers, and probably reflect the general mode shift away from public transport (which is probably more to do with changing job distributions than bicycle facilities at train stations).

Cycling

I have a longer time-series of bicycle-only mode share, compared to “involving bicycle”, so two charts here:

Observations:

Darwin lost top placing for cycling to work with a large decline in mode share (refer discussion above about the massive shift to bus).
Canberra took the lead with more strong growth.
Melbourne increased slightly between 2011 and 2016 (note: rain was forecast on census day which may have suppressed growth, more on that in a moment).
Hobart had a big increase in 2016, following rain in 2011.
Sydney remains at the bottom of the pack and declined in 2016.

Walking and cycling mode share is likely to be impacted by weather. Here’s a summary of recent census weather conditions for most cities (note: Canberra minimums were -3 in 2001, -7 in 2006, 0 in 2011 and -1 in 2016):

Perth had rain on all of the last four census days, while Adelaide had significant rain only in 2001 and 2011 (and indeed 2006 shows up with higher active transport mode share). Hobart had significant rain in 2011, which appears to have suppressed active transport mode share that year.

But perhaps equally important is the forecast weather as that could set people’s plans the night before. Here was the forecast for the 2016 census day, from the BOM website the night before:

Note that it didn’t end up raining in Melbourne, Adelaide, or Hobart.

The census is conducted in winter – which is the best time to cycle in Darwin (dry season) and not a great time to cycle in other cities. However the icy weather in Canberra clearly hasn’t stopped it getting the highest and fastest growing cycling mode share of all cities!

Indeed here is a chart from VicRoads showing the seasonality of cycling in Melbourne at their bicycle counters:

And in case you are interested, here are the (small) mode shares of journeys involving bicycle and some other modes (other than walking):

Walking only

Canberra was the only city to have a big increase, while there were declines in Darwin, Perth, Adelaide, Brisbane, and Sydney.

The smaller cities had the highest walking share, perhaps as people are – on average – closer to their workplace, followed by Sydney – the densest city. But city size doesn’t seem to explain cycling mode shares.

Car

The following chart shows the proportion of journeys to work made by car only (either as driver or passenger):

Sydney has the lowest car only mode share and it declined again in 2016. It was followed by Melbourne in 2016. Brisbane and Perth had large increases in car mode share in 2016 (in line with the PT decline mentioned above). Darwin also shows a big shift away from the car to public transport (although the total number of car trips still increased by 24%). Adelaide hit top spot, followed by Hobart and Perth.

Here is car as driver only:

And here is car as passenger only:

Car as passenger declined in all cities again in 2016, but was more common in the smaller cities, and least common in the bigger cities. I’m not sure why car as passenger declines paused for Perth and Sydney in 2006.

We can calculate an implied notional journey to work car occupancy by comparing car driver only and car passenger only journeys. This is not actual car occupancy, because it excludes people not travelling to work and excludes journeys that involved cars and other modes. However it does provide an indication of trends in car pooling for journeys to work.

There were further significant decreases in car commuter occupancy, in line with increasing car ownership and affordability.

Private transport

Here is a chart summing all modal combinations involving cars (driver or passenger), motorcycle/scooter, taxis, and trucks, but excluding any journeys that also include public transport.

The trends mirror what we have seen above, and are very similar to car-only travel.

Overall mode split

Here’s an overall split of journeys to work by “main mode” (click to enlarge):

Note: the 2001 data includes estimated splits of aggregated modes based on 2006 data.

I assigned a ‘main mode’ based on a hierarchy as follows:

Any journey involving train is counted with the main mode as train
Any other journey involving bus is counted with the main mode as bus
Any other journey involving tram and/or ferry is counted as “tram/ferry”
Any other journey involving car as driver, truck or motorbike/scooter is counted as “vehicle driver”
Any other journey involving car as passenger or taxi is counted as “vehicle passenger”
Any other journey involving walking or cycling only as “active”

How different are “place of work” and “place of enumeration” mode shares?

[this section updated 1 December 2017 with re-issued Place of Work data. See new Appendix 3 below for analysis of the changes]

The first edition of this post reported only “place of work” data, as place of enumeration data wasn’t released until 11 November 2017. This second edition now focuses on place of enumeration – where people were on census night.

The differences are not huge, as most people who live in a city also work in that city, but there are still a number of people who leave or enter cities’ statistical boundaries to go to work. Here’s an animation showing the main mode split by place of work and enumeration so you can compare the differences (you’ll need to click to enlarge). The animation dwells longer on place of work data.

Public + active transport main mode shares are generally higher for larger cities with place of work data, and smaller for smaller cities.

Here’s a closer look at the 2016 public transport mode shares by the two measures:

See also a detailed comparison in Appendix 1 below for 2011 Melbourne data.

I’d like to acknowledge Dr John Stone for assistance with historical journey to work data.

Appendix 1 – How to measure journey to work mode share

Firstly, I exclude people who did not work, worked at home, or did not state how they worked. The first two categories generate no transport activity, and if the actual results for “not stated” were biased in any way we would have no way of knowing how.

I prefer to use “place of enumeration” data (ie where people were on census night). “Place of usual residence” data is also available, but is unfortunately contaminated by people who were away from home on census day. The other data source is “Place of work”.

Some people might prefer to measure mode shares on Urban Centres which excludes rural areas within the larger blobs that are Greater Capital City Statistical Areas and Statistical Divisions (use this ABS map page to compare boundaries). However, “place of work” data is not readily available for that geography, and this method also excludes satellite urban centres that might be detached from the main urban centre, but are very much part of the economic unit of the city.

Another option is “Significant Urban Area”, which includes more fringe areas, and some more satellite towns, and in Canberra’s case crosses the NSW border to capture Queanbeyan.

What difference does it make?

Here’s a comparison of public transport mode shares for the different methods for 2011.

If you look closely, you’ll notice:

The more than you remove non-urban areas, the higher your public transport mode share, which makes sense, as those non-urban areas are mostly not served by public transport.
Place of usual residence tends to increase public transport mode shares for smaller cities (people probably visiting larger cities) and depresses public transport mode share in larger cities (people visiting smaller cities and towns).
Place of work is only readily available for Greater Capital City Statistical Areas. For the bigger cities it tends to inflate PT mode share where people might be using good inter-urban public transport options, or driving to good public transport options on the edges of cities (eg trains). However it has the opposite impact in Darwin and Canberra, where driving into the city is probably easier.

But I think the main point is that for any time series trend analysis you should use the same measure if possible.

If you want to compare the two, I’ve created a Tableau Public visualisation that has a large number of mode shares by both place of work and place of enumeration.

Appendix 2 – Estimating pre-2006 mode shares from aggregated data

For 2006 onwards, ABS TableBuilder provides counts for every possible combination of up to three modes (other than walking, which is assumed to be part of every journey). For example, in Melbourne in 2006, 36 people went to work by taxi, car as driver, and car as passenger (or so they said!). Unfortunately for years before 2006 data is not readily available with a full breakdown.

The 2001 data includes only aggregated counts for the following categories:

train and other (excluding bus)
bus and other (excluding train)
other two modes (no train or bus)
train and two other modes
bus and two other modes (excluding train)
three other modes (no train or bus)

Together these accounted for 3.7% of journeys in Melbourne and 4.5% of journeys in Sydney.

However all but two of those aggregate categories definitely involve train and/or bus, so can be included in public transport mode share calculations.

Journeys in the aggregate categories “Other two modes” and “Other three modes” might involve tram and/or ferry trips (if such modes exist in a city), but we don’t know for sure.

I’ve used the complete modal data for 2006 to calculate the percentage of 2006 journeys that fit into these two categories that are by public transport. I’ve then assumed these same percentage apply in 2001 to estimate total public transport mode shares for 2001 (for want of a better method).

Here are the 2001 relevant stats for each city:

(note: totals do not add perfectly due to rounding)

The estimates add up to 0.2% to the total public transport mode shares in cities with significant modes beyond train and bus (namely ferry and tram in Sydney, tram in Melbourne, ferry in Brisbane, tram and Adelaide). This almost entirely comes from “other two modes” category while “other three modes” is tiny. For these categories, almost no journeys in Perth, Canberra and Hobart actually involved a public transport mode.

In the past I have knowingly ignored public transport journeys that might be part of these categories, which almost certainly means public transport mode share is underestimated (I suspect most other analysts have too). By including some assumed public transport journeys my estimate should be closer to the true value, which I think is better than an underestimate.

But are these reasonable estimates? Are the 2001 modal breakdowns for these categories likely to be the same as 2006? Maybe not exactly, but because we are multiplying small numbers by small numbers, the impact of slightly inaccurate estimates is unlikely to shift the total by more than 0.1%. I tested the methodology between 2006 and 2011 results (eg using 2011 full breakdown against created 2006 aggregate categories and vice versa) and the estimated total mode shares were almost always exactly the same as the perfectly calculated shares (at worst there was a difference of 0.1% when rounding to one decimal place).

In the first edition of this post I had to estimate 2016 place of work mode shares in a similar way for public and private transport, but I wasn’t confident enough to estimate mode share of journeys involving cycling.

I now have the final data and I promised to see how I went, so here’s a comparison:

If you round to one decimal place, the estimates were no different for public and private transport and out by up to 0.1% for cycling (which is relatively significant for the small cycling mode shares).

I’ve applied a similar approach to estimate several other mode share types, and these are marked on charts.

Appendix 3 – How different is the re-issued place of work data?

In December 2017, ABS re-issued Place of Work data due to data quality issues. This is how they described it:

**The place of work data for the 2016 Census has been temporarily removed from the ABS website so an issue can be corrected. There was a discrepancy in the process used to transform detailed workplace location information into data suitable for output. The ABS will release the updated information in TableBuilder on December 2. The Working Population Profiles will be updated on December 13.**

I have loaded the new data, and here are differences in public transport and private transport mode shares for capital cities:

You can see differences of up to 0.3% (Melbourne PT mode share), but mostly quite small.

14 Comments | Australian Cities, Brisbane, Cycling, Melbourne, Mode share, Mode shift, Sydney | Tagged: Car Occupancy, Census Journey to Work | Permalink
Posted by chrisloader

What does the census tell us about motor vehicle ownership in Australian cities? (2006-2016)

Sun 30 July, 2017

With the latest release of census data it’s possible to take a detailed look at motor vehicle ownership in Australian cities. This post will look at ownership rates across time and space, and compare trends between car ownership, population growth, and population density. And this time I will cover 16 large Australian cities (but with a more detailed look at Melbourne).

I’ve measured motor vehicle ownership as motor vehicles per 100 persons in private occupied dwellings. If you want the boring but important details about how I’ve analysed the data, see the appendix at the end of this post.

I’ve used Tableau Public for this post, so all the charts and maps can be explored, and they cover all sixteen cities.

Is motor vehicle ownership increasing in all cities?

Elsewhere on this blog I’ve shown that motor vehicle ownership is increasing in all Australian states, but what about the cities? Here are the overall results for Australia’s larger cities, on motor vehicles per 100 persons basis. Note that the Y-axis only goes from 54 to 70, so the rate of change looks steeper than it really is.

(you can explore this data in Tableau)

Sydney unsurprisingly has the lowest average motor vehicle ownership, followed by Melbourne, Brisbane (Australia’s third biggest city), and then Cairns and Darwin. Perth was well on top, with Sunshine Coach rapidly increasing to claim second place. Most of the rest were around 66-68 motor vehicles per 100 persons in 2016.

But Melbourne is showing a very different trend to most other cities, with hardly any increase in ownership rate across the ten years (also, Canberra-Queanbeyan saw very little growth between 2011 and 2016).

At first I wondered whether Melbourne was a data error. However, I did the one data extract for all cities for both population and motor vehicle responses, and I’ve also checked for any potential duplicate SA1s. So I’m confident something very different is happening in Melbourne.

So let’s have a look at Melbourne in more spatial detail, starting with maximum detail over time:

(you can zoom in and explore this data in Tableau).

You can see lower ownership in the inner city, inner north, inner west, and the more socio-economically disadvantaged suburbs in the north and south-east. You can also see lower motor vehicle ownership around train lines in many middle suburbs. Other pockets of low motor vehicle ownership are in Clayton (presumably associated with university students) and Box Hill, and curiously some of the growth areas in the west and north. Very high motor vehicle ownership can be seen in wealthier areas and the outer east.

It’s a bit hard to see the trends with such a detailed map, so here’s a view aggregated at SA2 level (SA2s are roughly suburb-sized).

No doubt you are probably distracted by the changes in the legend. That’s because in 2006 there were no SA2s in the <20 and 30-40 ranges at all, and the 30-40 range is only present in 2016. That is, the legend has to expand over time to take into account SA2s with lower motor vehicle ownership rates.

You’ll notice a lot more light blue and green SA2s around the city centre, plus Clayton in the middle south-east switches to green in 2016.

Looking at it spatially, more areas appear to have increasing rather than decreasing motor vehicle ownership. But not all SA2s have the same population – or more particularly – the same population growth. So we need to look at the data in a non-spatial way.

Here’s a plot of population and motor vehicle ownership for all Melbourne SA2s, with the thin end of each “worm” being 2006 and the thick end being 2016.

Okay yes that does looks like a lot of scribbles (and you can explore the data in Tableau to find out what is what), but take a look at the patterns. There are lots of short worms heading to the right – these have very little population growth but some growth in motor vehicle ownership. Then there are lots of long worms that are heading up and to the left – which means large population growth and mostly declining motor vehicle ownership.

Here’s a similar view, but with a Y-axis of change in population since 2006:

(explore in Tableau)

The worms heading up and to the left include both inner city areas and outer growth areas. These areas seem to balance out the rest of Melbourne resulting in a stable ownership rate overall.

Some SA2s that are moving up and to the right more than others include Sunbury – South, Langwarrin, and Mount Martha. And there are a few in population decline like Endeavour Hills – South, Mill Park – South, and Keilor Downs.

The inner city results are not surprising, but declining ownership in outer growth areas is a little more surprising.

Is this to do with growth areas being popular with young families, and therefore containing proportionately more children?

Here’s a map of the percent of the population in each CD/SA1 that is aged 18-84 (ie approximately of “driving age”):

(view in Tableau)

The rates are highest in the central city and lowest in urban growth areas. And if you watch the animation closely, you’ll see areas that were “fringe growth” in 2006 have since had increasing portions of population aged 18-84, presumably as the children of the first residents have reached driving age (and/or moved out).

So what is happening with motor vehicles per 100 persons aged 18-84? Is there high motor vehicle ownership amongst driving aged people in growth areas?

Yes, a lot of growth areas are in the 80-85 range, similar to many middle suburban areas (view in Tableau)

Here’s the same thing but aggregated to SA2 level (explore in Tableau):

Motor vehicle ownership rates in most growth areas are similar to many established middle suburbs, but lower than non-growth fringe areas which show “saturated” levels of ownership (where there is roughly a one motor vehicle per person aged 18-84), particularly the outer east.

However in the outer growth areas of Sunbury (north-west) and Doreen (north-north-east), ownership rates are close to saturation in 2016.

But is the rate of motor vehicle ownership still declining amongst persons aged 18-84 in the outer growth areas? Here’s a similar chart to the previous one, but with ownership by persons aged 18-84 (explore in Tableau):

You can see most of the outer growth areas still have declining ownership rates. You can also see some established suburbs with strong population growth and increased ownership, including Dandenong and Braybrook (which includes the rapidly densifying suburbs of Maidstone and Maribyrnong).

Here’s a spatial view of the changes in ownership rates (area shading), as well as total changes in the household motor vehicle fleet (dots ). (I’ve assumed non-reporting private dwellings have the same average motor vehicle ownership as reporting dwellings in each area).

(explore in Tableau)

You can see outer growth areas shaded green (declining ownership), but also with large dots (large fleet growth).

But also you can see some declines in ownership in the middle eastern and north-eastern suburbs, and some non-growth outer suburbs, which is quite surprising. I’m not quite sure what might explain that.

You’ll also notice the scale for the dots starts at -830, which accommodates Wheelers Hill (in the middle south-east) where there has been a 2% decline in population, and 6% decline in motor vehicle fleet.

Okay, so that’s Melbourne, what about ownership rates amongst “driving aged” people in other cities?

Trends in motor vehicles per persons aged 18-84

(explore in Tableau)

The trends are similar, but Melbourne is even more interesting on this measure. It has declined from 81.3 to 80.7, bucking the trend of all other cities (although Canberra only grew from 88.4 in 2011 to 88.5 in 2016).

How does motor vehicle ownership relate to density?

Here’s a chart showing population weighted density and motor vehicle ownership for persons aged 18-84 for SA2s across all the big cities in 2016 (explore in Tableau):

Some dots (central Melbourne and Sydney) are off the chart so you can see patterns in the rest. I’ve labelled some of the outliers. The general pattern shows higher density areas generally having lower motor vehicle ownership.

Is densification related to lower motor vehicle ownership?

Here’s a chart showing how each city has moved in terms of population-weighted density (measured at CD or SA1 level) and ownership for persons aged 18-84, with the thick end of each worm 2016, and the thin end 2006.

(Note that the 2006 population weighted density figures are not perfectly comparable with 2011 and 2016 because they are measured at CD level rather than SA1 level, and CDs are slightly larger on average than SA1s)

(explore in Tableau)

You can see Sydney is a completely different city on these measures, and also that Melbourne is the only city heading to the left of the chart. Canberra is also bucking the trend between 2011 and 2016.

We can look at this within cities too. Here’s all the Local Government Areas (LGAs) for all the cities (note: City of Sydney and City of Melbourne are off the top-left of the chart)

(explore in Tableau)

Many Melbourne and Sydney LGAs are rising sharply with mostly declining motor vehicle ownership. But then there are Sydney LGAs like Woollahra, Mosman and Northern Beaches in Sydney that are showing increasing motor vehicle ownership while they densify (probably not great for traffic congestion!).

And we can then look inside cities. Here is Melbourne (again, several inner city SA2s are off the chart):

Some interesting outliers include:

The relatively dense Port Melbourne, Albert Park, Elwood with relatively high motor vehicle ownership.
The land-locked suburb of Gowanbrae with medium density but rapidly increasing car ownership (which has a limited Monday to Saturday bus service).
The growth area of Cranbourne South with reasonable density but more than saturated car ownership.
Relatively medium dense but low motor vehicle ownership of Clayton and Footscray.

Explore your own city in Tableau. You know you want to.

What are the spatial patterns of motor vehicle ownership in other cities?

The detail above has focussed on Melbourne, so here are some maps for others cities. You can explore any of the cities by zooming in from this Tableau map (be warned: it may take some time to load as I’ve ignored Tableau’s recommendations about how many showing more than 10,000 data points!). In fact for any of the maps you’ve seen on this blog, you can pan and zoom to see other cities.

To help see the changes in motor vehicle ownership between censuses more easily, I’ve prepared the following detailed animations.

Sydney

Brisbane

Adelaide

Perth

(Find Mandurah in Tableau)

Canberra

Hobart

Darwin

Cairns

Townsville

Sunshine Coast

Geelong

Central Coast (NSW)

Newcastle – Maitland

This post has only looked at spatial trends and the relationship with population density. There’s plenty more to explore about car ownership with census data, which I aim to cover in future posts.

I hope you’ve enjoyed this post, and found the interactive data at least half as fascinating as I have.

Oh, and sorry about some of the maps showing defunct train lines. I’m using what I can get from the WMS feed from Geoscience Australia.

Appendix – About the data

The Australian census includes the following question about how many registered motor vehicles were present at each occupied private dwelling on census night. This excludes motorcycles but includes some vehicles other than cars (probably mostly light vehicles).

96% of people counted in the 2016 census were in a private dwelling on census night, and 93.6% of occupied dwellings filled in the census and gave an answer to the motor vehicle question. So the data can give a very detailed – and hopefully quite accurate – picture.

I’ve used two measures of motor vehicle ownership:

Motor vehicles per 100 population (often referred to as “motorisation” in Europe), and
Motor vehicles per 100 persons aged 18-84

The first is easy to measure and easily comparable with other jurisdictions, but the second gives a better feel for what proportion of the “driving aged” population own a car. In an area with good alternatives to private transport, you might expect lower ownership rates.

Setting the lower age threshold at 18 works well for Victoria (imperfectly for other states with a lower licensing age), and 84 is an arbitrary threshold during the general decline in drivers license ownership by older people. So it’s not perfect, but is indicative, and certainly takes most children out of the equation.

As the motor vehicle question is based on what was parked at the dwelling on census night, I’ve used population present on census night (place of enumeration). That works well if someone was absent on census night and took their car with them, but not so well if they were absent and left their car behind (e.g. they took a taxi to the airport). You cannot win with that, but the census is timed in August during school and university term to try to minimise absences.

When calculating ownership rates, I’ve excluded people in dwellings that did not answer the motor vehicle question, and people in non-private dwellings. This is more robust than assumptions I made in previous posts on this topic so results will vary a little.

For 2011 and 2016, the census data provides counts of the number of dwellings with 0, 1, 2, 3, .. , 29 motor vehicles, and then bundles the rest as “30 of more”. For want of a better assumption, I’ve assumed dwellings with 30 or more motor vehicles have an average of 31 motor vehicles, which is probably conservative. But these are so rare they shouldn’t make any noticeable difference on the overall results.

As shorthand, I’ve referred to “motor vehicle ownership” rates, but you’ll note the census question includes company vehicles kept at home, so it’s not a perfect term to use, but then company vehicles are often available for general use.

I’ve used the 2011 boundaries of Significant Urban Areas (SUA) for each city, which are made up of SA2s and leave a good amount of room for urban fringe growth in 2016. However they do exclude some satellite towns (such as Melton, west of Melbourne).

I’ve extracted data at SA1 level geography for 2011 and 2016, and Collector District (CD) geography for 2006. In urban areas, SA1s average around 400 people while the older Collector Districts of 2006 averaged around 550 people. These are the smallest geographies for which motor vehicle and age data is available in each census. ABS do introduce some small data randomisation to protect privacy so there will be a little error well summing up lots of parcels.

I’ve generally excluded parcels with less than 5 people per hectare as an (arbitrary) threshold for “urban” residential areas. I’ve mapped all parcels to the 2016 boundaries of Local Government Areas and SA2s, and the 2011 boundaries of SUAs (2016 boundaries have not yet been released). Where boundaries do not line up perfectly, I’ve included a parcel in an SAU, LGA, or SA2 if more than 51% of the parcel’s area is within that boundary. The mapping isn’t perfect in all cases, particularly for growth area SA2s and 2006 CDs. See the alignments for SA2s, LGAs in Tableau.

1 Comment | Australian Cities, Brisbane, Car ownership, Melbourne, Sydney, Urban density | Permalink
Posted by chrisloader

How is Melbourne’s population density changing? (2006-2016)

Sun 9 July, 2017

With the first major release of 2016 census data, it’s possible to take a detailed look at the latest population density numbers in Melbourne. This post will explore how and where Melbourne’s density is increasing by comparing data from the 2006, 2011, and 2016 censuses.

About the data

This post looks at data mostly at the mesh block level. Mesh blocks are the smallest geographic unit at which the ABS publishes population and dwelling counts. They aim for each mesh block to have the same land use, and between 30 and 60 dwellings (where residential).

I’ve used Tableau Public to create this post, so you will be able to explore the maps in more detail yourself, using the links in this post. Be warned though: Tableau tried to dissuade me several times from adding so many mesh blocks to the maps and charts, so they may take a little time to load and update.

What does Melbourne’s population density look like?

Firstly, here’s the population density picture for most of Melbourne (you will probably need to open this is in a new window to see it more clearly).

(explore in Tableau)

Here is a closer look at Melbourne’s growing west, stretching as far as Bacchus Marsh:

You can see the expanding urban area, and you might also notice some of the new areas are coming up in red (densities in the 60-70s). This demonstrates that recent urban growth areas are much more dense than growth areas of 5-10 years ago. However that’s not happening in growth areas of Bacchus Marsh (which is outside Melbourne’s Urban Growth Boundary.

Here is a closer look at the northern growth areas:

You can see large areas of orange and red in north-western Craigieburn (top left of map) and Roxburgh Park in 2016 – that’s around 50-60 people per hectare, around double that of old-school suburbia.

Here’s the south-east growth corridors, where new high density areas are less widespread:

There’s also been plenty of change in population density in the inner city:

If you look carefully you can see a lot more purple around the city centre, but also plenty of population density increase around Brunswick in the north and Footscray in the west.

So this is this increase in population density due to rising dwelling densities or more people per dwelling?

Here is the dwelling density around Craigieburn:

(explore in Tableau)

There are dwelling densities of over 20 per hectare in the new north-western areas, which is likely to be contributing to higher population density.

Here’s a map showing the average dwelling occupancy – the ratio of population to dwelling counts. Note: this includes unoccupied dwellings at census time, so it’s not the average occupancy of occupied dwellings.

(explore in Tableau)

One clear trend is that the growth areas have higher average dwelling occupancy, quite probably related to young families moving into those areas. This, together with smaller block sizes, is likely leading to higher population density in growth areas.

If you look carefully you’ll also see some older outer areas with reducing average dwelling occupancy – quite possibly family homes where children have moved out.

What are the broader trends in density?

The above maps are incredibly detailed, and you are probably struggling a little with so many blocks of different colours. Time to take a step back.

Calculating the straight population density of Greater Melbourne makes no sense because most of the land within the statistical boundary is non-urban.

In other posts I’ve looked at population-weighted density, which is the average population density of all areas, weighted by the population of each area. It aims to summarise the population density at which the “average” person lives, which takes out the impact of large areas that are sparsely populated. But it is important to keep in mind that “average” does not mean typical (I’ll come back to that).

Here’s a chart showing Melbourne’s populated weighted density, as well as average density for mesh blocks with a population density of at least 5 persons/ha (an arbitrary threshold for urban residential areas).

Yes, that’s a massive increase in population-weighted density. So what’s going on here?

Well, here’s a chart showing the densities at which people in Melbourne lived at each census:

If you look at the green levels and below, you’ll notice in all years less than 2.5 million people lived at densities of below 35 persons/ha. There’s been little population growth at such lower densities – it’s mostly been at 35 persons/ha and above, pushing up the population-weighted density.

Greater Melbourne’s population-weighted density of 59 is quite high relative to the density distribution within Melbourne. Only around 600,000 people live at this or higher densities, with around 4 million living at lower densities. That’s a classic problem with summary statistics.

Where is the population-weighted density increasing the most? Here’s a map showing population-weighted densities by SA2 (2016 boundaries):

(explore in Tableau)

There are big increases in population weighted densities across inner Melbourne, but also in places like Clayton, Box Hill, Preston East, Doncaster.

What’s going on there? Box Hill’s population-weighted density went from 45 in 2011 to 72 in 2016. Here’s a look at the mesh block density for the area:

You can see a little densification outside the main centre on the rail line, but if you look really carefully, you’ll see some tiny purple mesh blocks right in the centre – apartment towers with large populations are bringing up the populated weighted density of the whole SA2.

What about median densities?

While no one statistic will tell you about “typical” density, we can calculate median density, which tells you the density in which the middle person lives.

Greater Melbourne’s median population density hasn’t increased a great deal:

Here’s a look at median density by SA2 (open in a new window to see more detail, including the numbers):

(explore in Tableau)

(note that a different set of colour ranges used to the previous maps because the medians are so close)

You can see a lot more red on the map – i.e. more and more areas of Melbourne have a median population density of in the 40s.

How has population and density changed by distance from the CBD?

Firstly, here’s a reference map of distances from the CBD:

(explore in Tableau)

Here’s the population of Melbourne by density and distance from the CBD:

(explore in Tableau)

You can see a lot of growth close to the CBD, but also around 20-23 km from the CBD, which includes several outer suburban growth areas.

Here’s a look at five year population growth by distance from the CBD:

In the five years to 2016 there was a lot more growth within 30 kms of the CBD, particularly within 5 km.

Finally, which mesh block densities are becoming more common. Here is the five year change in population by (mesh block) population density:

In the five years to 2011, the biggest population increase was at densities of 30 to 45 persons/ha. In the five years to 2016, the biggest population growth was at densities of 35 to 55 persons/ha. There was also considerable growth at densities of more than 400 persons/ha, which is likely to reflect new apartment towers.

You’ll find a few other charts in Tableau. Hope you enjoyed this post.

10 Comments | Melbourne, Urban density | Permalink
Posted by chrisloader

Update on trends in Australian transport

Sat 28 January, 2017

You might want to read a more recent post on this topic published in 2019.

This post charts some key Australian transport trends based on the latest available official data estimates as at January 2017 (including the Bureau of Infrastructure, Transport, and Regional Economics 2016 Yearbook).

Car use per capita has continued to decline in most Australian cities (the exceptions being Adelaide and Brisbane, but still well down on the peak of 2004):

Mass transit’s share of motorised passenger kms was very slightly in decline in most cities in 2014-15 (the exceptions being Sydney and Adelaide)

(note: “mass transit” includes trains, trams, ferries, and both public and private buses)

At the same time, estimated total vehicle kilometres in Australian cities has been increasing:

However, mass transit use has outpaced growth in car usage since 2003-04 across the five big cities:

In terms of percentage annual growth, car use growth only exceeded mass transit in 2009-10, and 2012-13.

Car ownership has still been slowly increasing (note the Y axis scale):

Australia’s domestic transport greenhouse gas emissions actually ever-so-slightly declined in 2015-16:

Here is driver licence ownership by age group for Australia:

(note: the rate is calculated as the sum of car, motorbike and truck licenses – including learner and probationary licences, divided by population. Some people have more than one driver’s licence so it’s not a perfect measure)

From June 2014 to June 2015, license ownership rates increased in all age groups except 30-39, 60-69 and 80+.

2015 saw a change in the trend on licence ownership rates for teenagers, with a slight increase after four years of decline. However the trends are quite different in each state:

(note: in most states 16 is the age where people are able to obtain a learner’s permit)

I’m really not sure why Western Australia has such a low licence ownership rate compared to the other states (maybe the data doesn’t actually include learner permits).

And finally, here are licence ownership rates for people aged 20-24, showing quite different trends in different states:

I’ll aim to elaborate more on these trends in updates to subject-specific posts when I get time.

15 Comments | Australian Cities, Car ownership, drivers license, Greenhouse Gas Emissions, Mode share | Permalink
Posted by chrisloader

Charting Transport

What does the census tell us about motor vehicle ownership in Australian cities? (2006-2016)

Is motor vehicle ownership increasing in all cities?

Trends in motor vehicles per persons aged 18-84

How does motor vehicle ownership relate to density?

Is densification related to lower motor vehicle ownership?